Boss CE-2 Clone

-
Hi everyone!
Welcome to my blog. Here I will post my works and what I like to do in my free time!
If you like guitars and guitar stuff, you're welcome. If you don't you're welcome too! :D

In this first post, I will show you the clone of the BOSS CE-2.
Here few pics of it! :)

Here you can see the pedal guts.
I bought a kit from OP Electronics.
Very fast shipping, and quality components too! 

Here's the finshed pedal. 
Alluminum enclosure, 3mm LED
Plastic knobs. SIMPLE! :D  

Commenti

Posta un commento

Post popolari in questo blog

Telecaster wiring refurbish

-
Immagine
I have this Fender telecaster, that had some problems to the electronics (Mostly because i screwed it up), so I decided to fix it that best that I could.  Neck pickup is the factory one, but I changed the bridge one for a Seymour Duncan Little 59, a humbucker.  I tought it would be cool to have the coil split option, so I took out the tone pot, and changed it with a push-push pot I had.  (The wiring is the same as a normal telecaster, but if you, like me, have a fender and an SD pickup, remind to swap the wires for the Fender pickups, otherwise, in the middle position, they will sound out of phase).  For this wiring I used, 250K volume pot, 500K tone pot (push-push), P.I.O. capacitor and some wire to extend the bridge pickup wire. Here's a pic of the finished project:  The guitar now sounds much better, and if you are careful, you can do it too without any problem! :)
Continua a leggere